Open Positions at C.W. Matthews | Georgia

Start Your Job Search

Location

Type of Work

Experience

North West Georgia

Traffic Control Laborer

Labor job duties are continually changing depending on the requirements of each project. Laborers are expected to assist in the general operation of each job site.

Laborer

CWM is seeking a reliable and hardworking Laborer to join our team. This position involves performing various tasks on job sites, with duties that may change depending on the specific needs of each project. The Laborer will assist in the general operation of the job site, ensuring tasks are completed safely and efficiently.

Highway Bridge Carpenter

We are seeking a skilled Highway Bridge Carpenter to join our team. The primary responsibility of this position is to build and construct bridge columns, decks, and caps, primarily by constructing forms for concrete. In addition to carpentry work, the Highway Bridge Carpenter will assist in various general tasks on the job site, contributing to the safe and efficient execution of bridge construction projects.

Experienced Construction & Manufacturing

Survey Party Chief

The Survey Party Chief's primary function is to provide all field layouts for assigned DOT projects. The Party Chief is responsible for calculating and staking all survey points with the use of electronic and/or manual instruments and ensuring all information produced by office personnel is accurate. All field data must be retained and archived for the company. Be able to read and understand blueprints, calculate all grade data (IE: bluetops, slope stakes, drainage structures, retaining walls, bridges) and collect data information. Also, needs to be familiar with and use both GPS equipment and Robotic total stations, computers, data collectors. Knowledge of Topcon software is a plus. The position consists of but is not limited to the following duties:

Experienced Construction & Manufacturing

Concrete Finisher

CWM is seeking a dedicated and skilled Concrete Finisher to join our concrete flat work and bridge crew. The primary responsibility of this position is to smooth wet concrete after a pour and assist with all tasks related to concrete work. Concrete Finishers will be expected to work nights and weekends as needed and must provide their own transportation to and from the work site. In addition to finishing concrete, the Concrete Finisher will be involved in various tasks across the job site, including formwork, steel setting, erosion control setup, equipment operation, and general cleanup. If you're looking to grow your career with a company that values development and advancement, this is the opportunity for you!

Concrete Construction

Experienced Construction & Manufacturing

Service Truck Driver

The Equipment Servicer must perform daily maintenance checks and report any mechanical or safety issues to a supervisor. In addition, the servicer is required to perform repairs to the equipment as needed. The position consists of but is not limited to the following duties:

Equipment Maintenance

Pipelayer

Pipe layer’s primary function is to assist operators in laying pipe on the project at correct location and grade. The Pipe Layer’s job duties are continually changing depending on the requirements of each project. Pipe layers are expected to assist in the general operation of each job site. The position consists of but is not limited to the following duties:

Experienced Construction & Manufacturing

Project Superintendent

The primary responsibilities of the PROJECT SUPERINTENDENT - CIVIL, is to lead and direct multiple Foremen, crews, and daily operations on mid to large civil projects. You will be responsible for safe planning, executing, scheduling, work methods, controlling cost, and maintaining positive relationships with site staff, clients, subcontractors, vendors, and engineers. This is a field-based position reporting directly to the General Superintendent.

Construction Management & Engineering

Project Manager

Project Manager you will be responsible for overseeing civil construction projects and ensuring they are completed safely, efficiently, and within budget. The ideal candidate will have strong leadership skills, extensive knowledge of construction processes, and the ability to effectively communicate with project engineers, and other members from the team.

Construction Management & Engineering

Grading Foreman

The primary responsibility of the FINE GRADE FOREMAN is to coordinate and supervise the safe, efficient field activities of a fine grading crew.

Experienced Construction & Manufacturing

I-285/I-20 West Interchange Project

Document Control Specialist

CWM is seeking a reliable, qualified individual to join our company as a Document Control Specialist. As part of our team on the I-285/I-20 West Interchange Project, you will oversee the storage, organization, and disbursal of records and documentation, observing legal guidelines and best practices. You will administer the data management processes of our centralized library, respond to requests for information (RFIs), and verify document completeness and format requirements.

General Office, Accounting, & IT

Water Truck Driver

We are seeking a skilled and reliable Water Truck Driver to join our team. The primary responsibility of the Water Truck Driver is to transport water to construction sites, ensuring crews working in remote areas have the water they need for their tasks. The ideal candidate will be responsible for transporting water in specialized trucks, maintaining equipment, and ensuring safe, timely delivery of water to designated locations.

Equipment Maintenance

Bulldozer Operator

Job Summary: CWM is seeking a skilled and dedicated Bulldozer Operator to join our team. The primary function of this role is to operate bulldozers for grading dirt and aggregate, dressing slopes, pushing pans, and utilizing various attachments such as root rakes, stone spreaders, and disks to assist with grading operations. The ideal candidate will be flexible, reliable, and ready to contribute to the overall operation of the job site, as well as operate additional equipment as needed.

Experienced Construction & Manufacturing

Backhoe Operator

CWM is seeking a skilled and versatile Backhoe Operator to join our team. The primary responsibility of this position is to operate all sizes of backhoes (both track and rubber tire) in support of grading operations. Operators will also be required to operate other heavy machinery as needed, including bulldozers, loaders, and various other equipment. This role includes assisting with all aspects of job site operations and ensuring safety and efficiency on site.

Experienced Construction & Manufacturing

Pipelayer

Pipe layer’s primary function is to assist operators in laying pipe on the project at correct location and grade. The Pipe Layer’s job duties are continually changing depending on the requirements of each project. Pipe layers are expected to assist in the general operation of each job site. The position consists of but is not limited to the following duties:

Experienced Construction & Manufacturing

Worksite Erosion Control Technician

CWM has an immediate opening for a Worksite Erosion Control Technician (WECS). Qualified candidates must have a minimum of 2 to 5 years’ experience as a WECS. The ideal candidate should have experience in heavy highway and large project erosion control to include erosion control planning, implementation and recording as well as up to date GDOT WECS card, NWSCC Level 1-A card, and a current valid drivers license. Re-certification assistance may be provided.

Experienced Construction & Manufacturing

I-285/I-20 West Interchange Project

Backhoe Operator

CWM is seeking a skilled and versatile Backhoe Operator to join our team. The primary responsibility of this position is to operate all sizes of backhoes (both track and rubber tire) in support of grading operations. Operators will also be required to operate other heavy machinery as needed, including bulldozers, loaders, and various other equipment. This role includes assisting with all aspects of job site operations and ensuring safety and efficiency on site.

Experienced Construction & Manufacturing

Project Engineer

The Project Engineer will play a vital role in assisting the project management team with the construction of multiple infrastructure projects, including grading, concrete paving, bridges, retaining walls, and asphalt. The ideal candidate will contribute to both pre-construction and construction phases, ensuring efficient project execution, quality control, and technical support throughout. This role offers the opportunity to work on some of the most challenging and rewarding projects in the Southeast.

Construction Management & Engineering

Front End Loader Operator

We are seeking an experienced and safety-conscious Front End Loader Operator to join our team. The primary responsibility of this role is to operate heavy equipment to move, load, and handle materials within the job site. The Front-End Loader Operator will use large earth-moving machines such as bulldozers, backhoes, excavators, front-end loaders, and other machinery to excavate, haul, load, push, roll, and move aggregate and related materials. The role also involves conducting pre-operational checks and ensuring proper equipment maintenance.

Experienced Construction & Manufacturing

Equipment Mechanic

The Equipment Mechanic’s primary function is to service and repair heavy construction equipment. The Mechanic must perform daily maintenance checks and report any mechanical or safety issues to a supervisor. In addition, Mechanics are required to perform repairs to equipment as needed. The position consists of but is not limited to the following duties:

Equipment Maintenance

I-285/I-20 West Interchange Project

Class A CDL Driver

We are seeking a skilled and safety-focused Class A CDL Driver with experience in heavy highway construction to join our team. The successful candidate will be responsible for transporting heavy equipment, materials, and supplies to and from construction job sites across the region. A thorough understanding of DOT regulations, load securement, and safe equipment handling is essential.

Experienced Construction & Manufacturing

I-285/I-20 West Interchange Project

Bulldozer Operator

Job Summary: CWM is seeking a skilled and dedicated Bulldozer Operator to join our team. The primary function of this role is to operate bulldozers for grading dirt and aggregate, dressing slopes, pushing pans, and utilizing various attachments such as root rakes, stone spreaders, and disks to assist with grading operations. The ideal candidate will be flexible, reliable, and ready to contribute to the overall operation of the job site, as well as operate additional equipment as needed.

Experienced Construction & Manufacturing

Front End Loader Operator

CWM is seeking a skilled and safety-conscious Loader Operator to join our team. The primary responsibility of the Loader Operator is to operate heavy equipment such as bulldozers, backhoes, excavators, front-end loaders, and other machinery to move, load, and handle materials within the asphalt plant area. The operator will work with aggregate and related materials, assisting the Plant Foreman in managing materials handling and equipment operations efficiently.

Asphalt Manufacturing

Experienced Construction & Manufacturing

Concrete Finisher

CWM is seeking a dedicated and skilled Concrete Finisher to join our concrete paving crews. The primary responsibility of this position is to smooth wet concrete after a pour and assist with all tasks related to concrete work. Concrete Finishers will be expected to work nights and weekends as needed and must provide their own transportation to and from the work site. In addition to finishing concrete, the Concrete Finisher will be involved in various tasks across the job site, including formwork, steel setting, erosion control setup, equipment operation, and general cleanup. If you're looking to grow your career with a company that values development and advancement, this is the opportunity for you!

Concrete Construction

Experienced Construction & Manufacturing

Macon/Middle Georgia

CDL Class A Driver / Labor

Job duties are continually changing depending on the requirements of each project. The CDL Class A driver/ Labor is expected to assist in the general operation of each job site. The driver is also required to maintain a valid class A Commercial Drivers License with Tanker Endorsement and DOT medical card. Truck Drivers must perform daily maintenance checks and report any mechanical or safety issues to a supervisor. The position consists of but is not limited to the following duties:

Experienced Construction & Manufacturing

Macon/Middle Georgia

CDL Class A Driver / Labor

Job duties are continually changing depending on the requirements of each project. The CDL Class A driver/ Labor is expected to assist in the general operation of each job site. The driver is also required to maintain a valid class A Commercial Drivers License with Tanker Endorsement and DOT medical card. Truck Drivers must perform daily maintenance checks and report any mechanical or safety issues to a supervisor. The position consists of but is not limited to the following duties:

Experienced Construction & Manufacturing

Backhoe Operator

CWM is seeking a skilled and versatile Backhoe Operator to join our team. The primary responsibility of this position is to operate all sizes of backhoes (both track and rubber tire) in support of grading operations. Operators will also be required to operate other heavy machinery as needed, including bulldozers, loaders, and various other equipment. This role includes assisting with all aspects of job site operations and ensuring safety and efficiency on site.

Experienced Construction & Manufacturing

Bulldozer Operator

Job Summary: CWM is seeking a skilled and dedicated Bulldozer Operator to join our team. The primary function of this role is to operate bulldozers for grading dirt and aggregate, dressing slopes, pushing pans, and utilizing various attachments such as root rakes, stone spreaders, and disks to assist with grading operations. The ideal candidate will be flexible, reliable, and ready to contribute to the overall operation of the job site, as well as operate additional equipment as needed.

Experienced Construction & Manufacturing

Macon/Middle Georgia

Backhoe Operator

CWM is seeking a skilled and versatile Backhoe Operator to join our team. The primary responsibility of this position is to operate all sizes of backhoes (both track and rubber tire) in support of grading operations. Operators will also be required to operate other heavy machinery as needed, including bulldozers, loaders, and various other equipment. This role includes assisting with all aspects of job site operations and ensuring safety and efficiency on site.

Experienced Construction & Manufacturing

North West Georgia

Backhoe/Track-hoe Operator

CWM is seeking a skilled and versatile Backhoe Operator to join our team. The primary responsibility of this position is to operate all sizes of backhoes (both track and rubber tire) in support of grading operations. Operators will also be required to operate other heavy machinery as needed, including bulldozers, loaders, and various other equipment. This role includes assisting with all aspects of job site operations and ensuring safety and efficiency on site.

Experienced Construction & Manufacturing

Grading Foreman

CWM has an immediate opening for "Experienced" Grade Foremen for construction projects in Southwest GA. Interested applicants must have a minimum of 5 years grading experience and a minimum of 2 years’ experience as a foreman. Responsibilities would include evaluating project work scopes, reviewing plans and specifications, coordinating field personnel. In addition, ensures that adequate materials, equipment, and tools are available for projects, and that equipment is operating properly. Ensures employee adherence to appropriate safety precautions and regulations. Checks and completes applicable daily reports. Performs other related duties as required. Georgia DOT experience preferred.

Experienced Construction & Manufacturing

Macon/Middle Georgia

Grading Foreman

CWM has an immediate opening for "Experienced" Grade Foremen for construction projects in Southwest GA. Interested applicants must have a minimum of 5 years grading experience and a minimum of 2 years’ experience as a foreman. Responsibilities would include evaluating project work scopes, reviewing plans and specifications, coordinating field personnel. In addition, ensures that adequate materials, equipment, and tools are available for projects, and that equipment is operating properly. Ensures employee adherence to appropriate safety precautions and regulations. Checks and completes applicable daily reports. Performs other related duties as required. Georgia DOT experience preferred.

Experienced Construction & Manufacturing

Columbus/West Georgia

Grading Foreman

CWM has an immediate opening for "Experienced" Grade Foremen for construction projects in Southwest GA. Interested applicants must have a minimum of 5 years grading experience and a minimum of 2 years’ experience as a foreman. Responsibilities would include evaluating project work scopes, reviewing plans and specifications, coordinating field personnel. In addition, ensures that adequate materials, equipment, and tools are available for projects, and that equipment is operating properly. Ensures employee adherence to appropriate safety precautions and regulations. Checks and completes applicable daily reports. Performs other related duties as required. Georgia DOT experience preferred.

Experienced Construction & Manufacturing

Columbus/West Georgia

Backhoe Operator

CWM is seeking a skilled and versatile Backhoe Operator to join our team. The primary responsibility of this position is to operate all sizes of backhoes (both track and rubber tire) in support of grading operations. Operators will also be required to operate other heavy machinery as needed, including bulldozers, loaders, and various other equipment. This role includes assisting with all aspects of job site operations and ensuring safety and efficiency on site.

Experienced Construction & Manufacturing

Macon/Middle Georgia

Bulldozer Operator

Job Summary: CWM is seeking a skilled and dedicated Bulldozer Operator to join our team. The primary function of this role is to operate bulldozers for grading dirt and aggregate, dressing slopes, pushing pans, and utilizing various attachments such as root rakes, stone spreaders, and disks to assist with grading operations. The ideal candidate will be flexible, reliable, and ready to contribute to the overall operation of the job site, as well as operate additional equipment as needed.

Experienced Construction & Manufacturing

North East Atlanta

Bulldozer Operator

Job Summary: CWM is seeking a skilled and dedicated Bulldozer Operator to join our team. The primary function of this role is to operate bulldozers for grading dirt and aggregate, dressing slopes, pushing pans, and utilizing various attachments such as root rakes, stone spreaders, and disks to assist with grading operations. The ideal candidate will be flexible, reliable, and ready to contribute to the overall operation of the job site, as well as operate additional equipment as needed.

Experienced Construction & Manufacturing

North West Georgia

Bulldozer operator

Job Summary: CWM is seeking a skilled and dedicated Bulldozer Operator to join our team. The primary function of this role is to operate bulldozers for grading dirt and aggregate, dressing slopes, pushing pans, and utilizing various attachments such as root rakes, stone spreaders, and disks to assist with grading operations. The ideal candidate will be flexible, reliable, and ready to contribute to the overall operation of the job site, as well as operate additional equipment as needed.

Experienced Construction & Manufacturing

Bulldozer Operator

Job Summary: CWM is seeking a skilled and dedicated Bulldozer Operator to join our team. The primary function of this role is to operate bulldozers for grading dirt and aggregate, dressing slopes, pushing pans, and utilizing various attachments such as root rakes, stone spreaders, and disks to assist with grading operations. The ideal candidate will be flexible, reliable, and ready to contribute to the overall operation of the job site, as well as operate additional equipment as needed.

Experienced Construction & Manufacturing

Backhoe Operator

CWM is seeking a skilled and versatile Backhoe Operator to join our team. The primary responsibility of this position is to operate all sizes of backhoes (both track and rubber tire) in support of grading operations. Operators will also be required to operate other heavy machinery as needed, including bulldozers, loaders, and various other equipment. This role includes assisting with all aspects of job site operations and ensuring safety and efficiency on site.

Experienced Construction & Manufacturing

North West Atlanta

Backhoe/Track-hoe Operator

CWM is seeking a skilled and versatile Backhoe Operator to join our team. The primary responsibility of this position is to operate all sizes of backhoes (both track and rubber tire) in support of grading operations. Operators will also be required to operate other heavy machinery as needed, including bulldozers, loaders, and various other equipment. This role includes assisting with all aspects of job site operations and ensuring safety and efficiency on site.

Experienced Construction & Manufacturing

North East Georgia

Backhoe Operator

CWM is seeking a skilled and versatile Backhoe Operator to join our team. The primary responsibility of this position is to operate all sizes of backhoes (both track and rubber tire) in support of grading operations. Operators will also be required to operate other heavy machinery as needed, including bulldozers, loaders, and various other equipment. This role includes assisting with all aspects of job site operations and ensuring safety and efficiency on site.

Experienced Construction & Manufacturing

North East Atlanta

Backhoe/Track-hoe Operator

CWM is seeking a skilled and versatile Backhoe Operator to join our team. The primary responsibility of this position is to operate all sizes of backhoes (both track and rubber tire) in support of grading operations. Operators will also be required to operate other heavy machinery as needed, including bulldozers, loaders, and various other equipment. This role includes assisting with all aspects of job site operations and ensuring safety and efficiency on site.

Experienced Construction & Manufacturing

Highway Bridge Carpenter

We are seeking a skilled Highway Bridge Carpenter to join our team. The primary responsibility of this position is to build and construct bridge columns, decks, and caps, primarily by constructing forms for concrete. In addition to carpentry work, the Highway Bridge Carpenter will assist in various general tasks on the job site, contributing to the safe and efficient execution of bridge construction projects.

Experienced Construction & Manufacturing

Laborer

CWM is seeking a reliable and hardworking Laborer to join our team. This position involves performing various tasks on job sites, with duties that may change depending on the specific needs of each project. The Laborer will assist in the general operation of the job site, ensuring tasks are completed safely and efficiently.

Columbus/West Georgia

Bulldozer Operator

Job Summary: CWM is seeking a skilled and dedicated Bulldozer Operator to join our team. The primary function of this role is to operate bulldozers for grading dirt and aggregate, dressing slopes, pushing pans, and utilizing various attachments such as root rakes, stone spreaders, and disks to assist with grading operations. The ideal candidate will be flexible, reliable, and ready to contribute to the overall operation of the job site, as well as operate additional equipment as needed.

Experienced Construction & Manufacturing

We are an equal opportunity employer and committed to hiring without regard to race, color, religion, sex, national origin, disability, veteran status, or any other legally protected status.